Porsche
>
992 (911) 2019>>
>
Exhausts
>
Manifold / Headers
>
Akrapovic Evolution header set (Titanium). Porsche 911 (991.2) GT3 RS 2020
Akrapovic Evolution header set (Titanium). Porsche 911 (991.2) GT3 RS 2020 - E-PO
Code: E-PO/T/4
Evolution header set (Titanium).
Fits:
Porsche 911 (991.2) GT3 RS 2020
Evolution Header Set converts the slip-on system into a full system designed to give noticeably increased power at higher revs. Handcrafted titanium headers incorporate 100 cpsi sports catalytic convertors and side mufflers—all designed to increase power and torque—the Evolution Header Set utilizes integrated catalytic convertors and the functionality of the exhaust valves to deliver an out-and-out attack on the senses. With the valves in the open position, it delivers a sportier and hard-hitting sound, but also has the option of a lower sound level when the valves are closed, perfect for use in more everyday locations. Offering an increased weight savings in the area behind the engine and the rear axle, the reduction will enhance the handling and improve performance.
When installing Akrapovič aftermarket optional link pipes with sports catalytic converters or without catalytic converters, which are developed for use on closed tracks only, remapping the ECU is mandatory. When installing Akrapovič aftermarket exhaust system that was developed for use on closed tracks, we recommend remapping the ECU in order to prevent potential »check engine light« warning signals.
THIS PRODUCT DOES NOT MEET EMISSION COMPLIANCE REQUIREMENTS FOR STREET OR HIGHWAY USE.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
E-PO
The product you are viewing cross references to these numbers
Fits:
Porsche 911 (991.2) GT3 RS 2020
Evolution Header Set converts the slip-on system into a full system designed to give noticeably increased power at higher revs. Handcrafted titanium headers incorporate 100 cpsi sports catalytic convertors and side mufflers—all designed to increase power and torque—the Evolution Header Set utilizes integrated catalytic convertors and the functionality of the exhaust valves to deliver an out-and-out attack on the senses. With the valves in the open position, it delivers a sportier and hard-hitting sound, but also has the option of a lower sound level when the valves are closed, perfect for use in more everyday locations. Offering an increased weight savings in the area behind the engine and the rear axle, the reduction will enhance the handling and improve performance.
When installing Akrapovič aftermarket optional link pipes with sports catalytic converters or without catalytic converters, which are developed for use on closed tracks only, remapping the ECU is mandatory. When installing Akrapovič aftermarket exhaust system that was developed for use on closed tracks, we recommend remapping the ECU in order to prevent potential »check engine light« warning signals.
THIS PRODUCT DOES NOT MEET EMISSION COMPLIANCE REQUIREMENTS FOR STREET OR HIGHWAY USE.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
E-PO
99111104782
99111104882
9A111302195
9A1113021FX
9A111302295
9A1113022FX
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
€10,001.95
Now €9,801.91
Orderable
Related products
Titanium exhaust head stud kit. Porsche 996TT/ 997TT/ GT3 / GT2
Code: SL-Ti-18
High performance stud + nut kits for the exhaust manifold to cylinder head for Porsche. Using titanium and Inconel alloy studs, aerospace lock nuts, and a well-thought and balanced combination of metals and plating/coatings, our fasteners will perform better than the traditional fastener. They will never oxidize, and hence will unscrew easily when required.
Novel ultra-high-performance product
• Use of Titanium Ti6Al4V technology
• Extreme perceived quality
Contains 18 x Studs, Nuts & Washers
Fits:
Porsche 996 Turbo / GT3 / GT2
Porsche 997 Turbo / GT3 / GT2
Porsche 997.2 ALL
Porsche 991 ALL
Porsche 992 ALL
Porsche 987 2009-12
Porsche 981
Porsche 718 GT4
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
SL-Ti-18
The product you are viewing cross references to these numbers
Novel ultra-high-performance product
• Use of Titanium Ti6Al4V technology
• Extreme perceived quality
Contains 18 x Studs, Nuts & Washers
Fits:
Porsche 996 Turbo / GT3 / GT2
Porsche 997 Turbo / GT3 / GT2
Porsche 997.2 ALL
Porsche 991 ALL
Porsche 992 ALL
Porsche 987 2009-12
Porsche 981
Porsche 718 GT4
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
SL-Ti-18
90037813100
90037822709
99907507400
90037822701
99907353501
99907507400
99907353501
99907507400
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster S 981 3.4L 2012-16
- Porsche Boxster Spyder 3.8L 2016
- Porsche Boxster 718 2.0L Manual (300 Bhp)
- Porsche Boxster 718 2.0L PDK (300 Bhp)
- Porsche Boxster S 718 2.5L Manual (350 Bhp)
- Porsche Boxster S 718 2.5L PDK (350 Bhp)
- Porsche Boxster T 718 2.0L Manual (300 Bhp)
- Porsche Boxster T 718 2.0L PDK (300 Bhp)
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp)
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp)
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
- Porsche 997 MKII GT3 2010>>
- Porsche 997 MKII Turbo 2009>>
- Porsche 997 MKII GT2 RS 2011>>
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 R 4.0L (500 Bhp)
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
- Porsche 991 Speedster 4.0L (510Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
- Porsche 991 GT2 RS 3.8L PDK (700 bhp)
- Porsche 992 Carrera 2 3.0L
- Porsche 992 Carrera 4 3.0L
- Porsche 992 Carrera 2 Cabriolet 3.0L
- Porsche 992 Carrera 4 Cabriolet 3.0L
- Porsche 992 Carrera 2S 3.0L
- Porsche 992 Carrera 4S 3.0L
- Porsche 992 Carrera 2S Cabriolet 3.0L
- Porsche 992 Carrera 4S Cabriolet 3.0L
- Porsche 992 Targa 4 3.0L
- Porsche 992 Targa 4S 3.0L
- Porsche 992 Speedster 4.0L
- Porsche 992 Turbo 3.8L
- Porsche 992 Turbo S 3.8L
- Porsche 992 Turbo Cabriolet 3.8L
- Porsche 992 Turbo S Cabriolet 3.8L
- Porsche 992 GT3 4.0L
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S 3.4L 981 2013-16
- Porsche Cayman GT4 3.8L 2015-16
- Porsche Cayman GT4 718 4.0L / GT4 RS 718 4.0L
€269.54
Now €264.15
In stock
Inconel exhaust head stud kit. Porsche 996TT/ 997TT/ GT3 / GT2
Code: SL-In-18
High performance stud + nut kits for the exhaust manifold to cylinder head for Porsche. Using titanium and Inconel alloy studs, aerospace lock nuts, and a well-thought and balanced combination of metals and plating/coatings, our fasteners will perform better than the traditional fastener. They will never oxidize, and hence will unscrew easily when required.
Novel ultra-high-performance product
• Use of Inconel 718 and aerospace technology
• Extreme perceived quality
Contains 18 x Studs, Nuts & Washers
Fits:
Porsche 996 Turbo / GT3 / GT2
Porsche 997 Turbo / GT3 / GT2
Porsche 997.2 ALL
Porsche 991 ALL
Porsche 992 ALL
Porsche 987 2009-12
Porsche 981
Porsche 718 GT4
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
SL-In-18
The product you are viewing cross references to these numbers
Novel ultra-high-performance product
• Use of Inconel 718 and aerospace technology
• Extreme perceived quality
Contains 18 x Studs, Nuts & Washers
Fits:
Porsche 996 Turbo / GT3 / GT2
Porsche 997 Turbo / GT3 / GT2
Porsche 997.2 ALL
Porsche 991 ALL
Porsche 992 ALL
Porsche 987 2009-12
Porsche 981
Porsche 718 GT4
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
SL-In-18
90037813100
90037822709
99907507400
90037822701
99907353501
99907507400
99907353501
99907507400
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster S 981 3.4L 2012-16
- Porsche Boxster Spyder 3.8L 2016
- Porsche Boxster 718 2.0L Manual (300 Bhp)
- Porsche Boxster 718 2.0L PDK (300 Bhp)
- Porsche Boxster S 718 2.5L Manual (350 Bhp)
- Porsche Boxster S 718 2.5L PDK (350 Bhp)
- Porsche Boxster T 718 2.0L Manual (300 Bhp)
- Porsche Boxster T 718 2.0L PDK (300 Bhp)
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp)
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp)
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
- Porsche 997 MKII GT3 2010>>
- Porsche 997 MKII Turbo 2009>>
- Porsche 997 MKII GT2 RS 2011>>
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 R 4.0L (500 Bhp)
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
- Porsche 991 Speedster 4.0L (510Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
- Porsche 991 GT2 RS 3.8L PDK (700 bhp)
- Porsche 992 Carrera 2 3.0L
- Porsche 992 Carrera 4 3.0L
- Porsche 992 Carrera 2 Cabriolet 3.0L
- Porsche 992 Carrera 4 Cabriolet 3.0L
- Porsche 992 Carrera 2S 3.0L
- Porsche 992 Carrera 4S 3.0L
- Porsche 992 Carrera 2S Cabriolet 3.0L
- Porsche 992 Carrera 4S Cabriolet 3.0L
- Porsche 992 Targa 4 3.0L
- Porsche 992 Targa 4S 3.0L
- Porsche 992 Speedster 4.0L
- Porsche 992 Turbo 3.8L
- Porsche 992 Turbo S 3.8L
- Porsche 992 Turbo Cabriolet 3.8L
- Porsche 992 Turbo S Cabriolet 3.8L
- Porsche 992 GT3 4.0L
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S 3.4L 981 2013-16
- Porsche Cayman GT4 3.8L 2015-16
- Porsche Cayman GT4 718 4.0L / GT4 RS 718 4.0L
€359.38
Now €352.19
In stock
RENNKRAFT™ Modular street and racing headers with HJS catalytic converters Porsche 992 GT3 2022>>
Code: FSPOR992GT3MH
Fabspeed RENNKRAFT™ Modular street and racing headers with HJS catalytic converters.
These modular headers are the perfect solution for any street driven 992 GT3. Our RENNKRAFT™ modular design features a quick release V-band connector that allows the owner to easily swap between our German made HJS 200 cell cats and QUICKTRACK™ cat bypass "straight pipes" for track use (patent pending). Rennkraft, translated from German is "race power". These unique headers offer true street and racetrack functionality in an innovative precision engineered package.
SOUND:
Many say sound is a subjective thing, but we like to think we've made the 992 GT3 sound objectively better with these high flowing headers. Equipped with our 200 cell cats, you will get a louder exhaust note with a much more raw sound. Higher frequency tones are more defined, and deceleration burbles are more robust and transparent. With the cat bypass pipes installed, the GT3 turns into a motorsport bred monster. At [art throttle the volume isn't overbearing, but the sound is very aggressive and race bred. With the stock muffler in place, there is no drone what-so-ever, even with the cat bypass option installed.
POWER:
After extensive dyno development we found the optimal header length and diameter. With no tune, compared to a stock car we gained 16 whp and 20 ft/lbs of TQ with the Sport Cats and 19 whp and 26 ft/lbs of TQ with Cat Bypass installed. That's a gain of 19 HP and 23 HP, respectively, at the crank! Peak horsepower also increased from our baseline of 452 whp to 461 whp with our HJS Sport Cats and 468 whp with Cat Bypass Pipes. See our dyno graph above for more details.
FEATURES:
• Fits all Porsche 992 GT3 2022+ Models worldwide (This system does delete the GPF, and will cause a check engine light for a monitored GPF system unless a simulator or tune is used)
• Impressive dyno proven power gains of 16 whp and 20 ft/lbs of TQ with the Sport Cats and 19 whp and 26 ft/lbs of TQ with Cat Bypass installed
• Save 6 lbs / 2.7 KGs with Cat Bypass compared to the factory headers
• Modular design that uses a V-band clamp so one can quickly swap between cats and cat bypass
• Constructed from CNC mandrel-bent T304L stainless steel
• Switching to cat-bypass for track events prevents catalytic converter degradation during all out competition racing abuse
• With the RENNKRAFT™ system, you can quickly install our QUICKTRACK™ cat bypass pipes for Racing and all out Race track-only competition events
• F1 style high velocity merge collectors
• Designed from 3D scans of the OEM headers so we can achieve perfect bolt-on fitment
• We use German-made HJS HD tri-metallic 200-cell EURO 6 homologated catalytic converters for the best performance and reliability
• We use the largest catalytic converters that will fit in the factory location for maximum flow
• Optimized for maximum performance with NO catalyst generated check engine light, guaranteed, when Sport Cats are installed
• Built 100% in house at Fabspeed Motorsport USA in Fort Washington, PA
• 25+ years of air-cooled and water-cooled Porsche experience went into our design for these hand-crafted headers
• Simple bolt-on installation, no cutting or welding required
• All Fabspeed performance products are backed by the Fabspeed Lifetime Warranty
Why We Choose HJS Catalytic Converters:
HJS German imported catalytic converters are made from some of the highest grade materials you can find in a catalytic converter. This yields high performance gains and longevity so it wont deteriorate over time like lower grade catalytic converters. These catalytic converters flow up to 93-95% of a straight pipe in most applications. The benefit is that you get the "straight pipe sound" while still being able to provide enough emissions scrubbing to prevent a check engine light. If you'd like to learn more, watch our video about HJS catalytic converters.
Sport Catalytic Converter (STREET) - This product removes the OEM catalytic converters from the vehicle, and as such, is strictly intended for closed track events and off-road use only. This product contains a High-Flow Sport Catalytic Converter solely intended for track and race cars as it is NOT California Air Resources Board Certified and not EPA certified. You are hereby informed and warned to check your local, state, and federals laws before buying and installing these or any aftermarket parts to be sure whether usage is in violation. All installation-risk and use-risk is borne by the end-user and installer of these parts.
Cat Bypass (RACE) - This product removes the OEM catalytic converters from the vehicle, and as such, is strictly intended for closed track events and off-road use only. This product is or contains a Racing Cat Bypass Pipe, which will give you check engine lights on OBD2 cars. Racing Cat Bypass Pipes are solely intended for track and race cars as they are NOT California Air Resources Board Certified and not EPA certified. You are hereby informed and warned to check your local, state, and federals laws before buying and installing these or any aftermarket parts to be sure whether usage is in violation. All installation-risk and use-risk is borne by the end-user and installer of these parts.
PURCHASE DISCLAIMER: Fabspeed Motorsport does not condone the use of emission defeat devices for any vehicles used on public streets or roadways. Fabspeed Motorsport will not tamper, remove, disable, or bypass emissions equipment on a motor vehicle in accordance with 40 CFR Section 86.1854.12(a)(3), Clean Air Act 40 CFR 1068.101(b). This includes software, known as tunes, that reprogram a motor vehicles electronic control module to alter engine performance and enable the removal of filters, catalysts, and other critical emissions controls.
Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR992GT3MH
The product you are viewing cross references to these numbers
These modular headers are the perfect solution for any street driven 992 GT3. Our RENNKRAFT™ modular design features a quick release V-band connector that allows the owner to easily swap between our German made HJS 200 cell cats and QUICKTRACK™ cat bypass "straight pipes" for track use (patent pending). Rennkraft, translated from German is "race power". These unique headers offer true street and racetrack functionality in an innovative precision engineered package.
SOUND:
Many say sound is a subjective thing, but we like to think we've made the 992 GT3 sound objectively better with these high flowing headers. Equipped with our 200 cell cats, you will get a louder exhaust note with a much more raw sound. Higher frequency tones are more defined, and deceleration burbles are more robust and transparent. With the cat bypass pipes installed, the GT3 turns into a motorsport bred monster. At [art throttle the volume isn't overbearing, but the sound is very aggressive and race bred. With the stock muffler in place, there is no drone what-so-ever, even with the cat bypass option installed.
POWER:
After extensive dyno development we found the optimal header length and diameter. With no tune, compared to a stock car we gained 16 whp and 20 ft/lbs of TQ with the Sport Cats and 19 whp and 26 ft/lbs of TQ with Cat Bypass installed. That's a gain of 19 HP and 23 HP, respectively, at the crank! Peak horsepower also increased from our baseline of 452 whp to 461 whp with our HJS Sport Cats and 468 whp with Cat Bypass Pipes. See our dyno graph above for more details.
FEATURES:
• Fits all Porsche 992 GT3 2022+ Models worldwide (This system does delete the GPF, and will cause a check engine light for a monitored GPF system unless a simulator or tune is used)
• Impressive dyno proven power gains of 16 whp and 20 ft/lbs of TQ with the Sport Cats and 19 whp and 26 ft/lbs of TQ with Cat Bypass installed
• Save 6 lbs / 2.7 KGs with Cat Bypass compared to the factory headers
• Modular design that uses a V-band clamp so one can quickly swap between cats and cat bypass
• Constructed from CNC mandrel-bent T304L stainless steel
• Switching to cat-bypass for track events prevents catalytic converter degradation during all out competition racing abuse
• With the RENNKRAFT™ system, you can quickly install our QUICKTRACK™ cat bypass pipes for Racing and all out Race track-only competition events
• F1 style high velocity merge collectors
• Designed from 3D scans of the OEM headers so we can achieve perfect bolt-on fitment
• We use German-made HJS HD tri-metallic 200-cell EURO 6 homologated catalytic converters for the best performance and reliability
• We use the largest catalytic converters that will fit in the factory location for maximum flow
• Optimized for maximum performance with NO catalyst generated check engine light, guaranteed, when Sport Cats are installed
• Built 100% in house at Fabspeed Motorsport USA in Fort Washington, PA
• 25+ years of air-cooled and water-cooled Porsche experience went into our design for these hand-crafted headers
• Simple bolt-on installation, no cutting or welding required
• All Fabspeed performance products are backed by the Fabspeed Lifetime Warranty
Why We Choose HJS Catalytic Converters:
HJS German imported catalytic converters are made from some of the highest grade materials you can find in a catalytic converter. This yields high performance gains and longevity so it wont deteriorate over time like lower grade catalytic converters. These catalytic converters flow up to 93-95% of a straight pipe in most applications. The benefit is that you get the "straight pipe sound" while still being able to provide enough emissions scrubbing to prevent a check engine light. If you'd like to learn more, watch our video about HJS catalytic converters.
Sport Catalytic Converter (STREET) - This product removes the OEM catalytic converters from the vehicle, and as such, is strictly intended for closed track events and off-road use only. This product contains a High-Flow Sport Catalytic Converter solely intended for track and race cars as it is NOT California Air Resources Board Certified and not EPA certified. You are hereby informed and warned to check your local, state, and federals laws before buying and installing these or any aftermarket parts to be sure whether usage is in violation. All installation-risk and use-risk is borne by the end-user and installer of these parts.
Cat Bypass (RACE) - This product removes the OEM catalytic converters from the vehicle, and as such, is strictly intended for closed track events and off-road use only. This product is or contains a Racing Cat Bypass Pipe, which will give you check engine lights on OBD2 cars. Racing Cat Bypass Pipes are solely intended for track and race cars as they are NOT California Air Resources Board Certified and not EPA certified. You are hereby informed and warned to check your local, state, and federals laws before buying and installing these or any aftermarket parts to be sure whether usage is in violation. All installation-risk and use-risk is borne by the end-user and installer of these parts.
PURCHASE DISCLAIMER: Fabspeed Motorsport does not condone the use of emission defeat devices for any vehicles used on public streets or roadways. Fabspeed Motorsport will not tamper, remove, disable, or bypass emissions equipment on a motor vehicle in accordance with 40 CFR Section 86.1854.12(a)(3), Clean Air Act 40 CFR 1068.101(b). This includes software, known as tunes, that reprogram a motor vehicles electronic control module to alter engine performance and enable the removal of filters, catalysts, and other critical emissions controls.
Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR992GT3MH
0PB254400F
0PB254400E
0PB254450F
0PB254450E
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 992 GT3 4.0L
Choose your Configuration:
Prices from: €5,476.48