Retro Performance Pistons and cylinders
It fits Porsche 356; C, SC, 1963-66 & Porsche 912; 1965 and Up with the 3 piece case. The Cylinders are Biral with CP Forged pistons with 30° Angle.
CP Forgings are made from 2618 Aluminium, They have a 0 offset with extra material under the top for the valve pocket, CP kits come with wirelock pin clips for extreme RPM. Biral Liners are a cast iron sleeve with aluminium fins, making them lighter and dissipate heat better . This kit requires no machine work, when installing in factory Porsche case & heads.
Engine size: 1600cc
Stroke: 74mm
Cylinders: Biral.
Pistons: CP 2618 Forged
Dome Height: .155
Compression: 9.5:1
Piston Angle: 30°
Kit includes: 4 Cylinders, 4 Pistons, A set of Piston Rings, and 4 wrist pins and wire locks with tool.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
0081186PCP
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356C 1963-65
It fits Porsche 356; C, SC, 1963-66 & Porsche 912; 1965 and Up with the 3 piece case. The Cylinders are Biral with JE Forged pistons with 30° Angle.
JE Forgings are made from 2618 Aluminium, They have a 0 offset with extra material under the top for the valve pocket, Biral Liners are a cast iron sleeve with aluminium fins, making them lighter and dissipate heat better. This is a High Compression kit 11.5:1 more commonly used in race-cars . This kit requires no machine work, when installing in factory Porsche case & heads
Engine size: 1600cc
Stroke: 74mm
Cylinders: Biral.
Pistons: JE 2618 Forged
Dome Height: .295
Compression: 11.5:1
Piston Angle: 30°
Kit includes: 4 Cylinders, 4 Pistons, A set Piston Rings, and 4 wrist pins and clips.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
0081182PJE
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356C 1963-65
It fits Porsche 356; C, SC, 1963-66 & Porsche 912; 1965 and Up with the 3 piece case. The Cylinders are Biral with JE Forged pistons with 30° Angle.
JE Forgings are made from 2618 Aluminium, They have a 0 offset with extra material under the top for the valve pocket, Biral Liners are a cast iron sleeve with aluminium fins, making them lighter and dissipate heat better. This is a High Compression kit 11.5:1 more commonly used in race-cars . This kit requires no machine work, when installing in factory Porsche case & heads.
Engine size: 1600cc
Stroke: 74mm
Cylinders: Biral.
Pistons: JE 2618 Forged
Dome Height: .295
Compression: 11.5:1
Piston Angle: 30°
Kit includes: 4 Cylinders, 4 Pistons, A set of Piston Rings, and 4 wrist pins and clips.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
0081183PJE
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356C 1963-65
It fits Porsche 356; C, SC, 1963-66 & Porsche 912; 1965 and Up with the 3 piece case. The Cylinders are Biral with JE Forged pistons with 30° Angle.
JE Forgings are made from 2618 Aluminium, They have a 0 offset with extra material under the top for the valve pocket, Biral Liners are a cast iron sleeve with aluminium fins, making them lighter and dissipate heat better. This is a High Compression kit 9.5:1 more commonly used in race-cars . This kit requires no machine work, when installing in factory Porsche case & heads
Engine size: 1600cc
Stroke: 74mm
Cylinders: Biral.
Pistons: JE 2618 Forged
Dome Height: .295
Compression: 9.5:1
Piston Angle: 30°
Kit includes: 4 Cylinders, 4 Pistons, A set of Piston Rings, and 4 wrist pins and clips.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
0081183CJE
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356C 1963-65
It fits Porsche 356; C, SC, 1963-66 & Porsche 912; 1965 and Up with the 3 piece case. The Cylinders are Cast Iron with JE Forged pistons with 30° Angle.
JE Forgings are made from 2618 Aluminum, They have a 0 offset with extra material under the top for the valve pocket. This kit requires no machine work, when installing in factory Porsche case & heads.
Engine size: 1600cc
Stroke: 74mm
Cylinders: Cast Iron
Pistons: JE 2618 Forged
Dome Height: .155
Compression: 9.5:1
Piston Angle: 30°
Kit includes: 4 Cylinders, 4 Pistons, A set of Piston Rings, and 4 wrist pins and clips.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
0081186CJE
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356C 1963-65
JE Forgings are made from 2618 Aluminum, They have a 0 offset with extra material under the top for the valve pockets. The Cast Iron Liners come with out the head gasket grove.
Engine size: 2.7
Stroke: 70.4
Cylinders: Cast Iron
Pistons: JE 2618 Forged
Dome CC: 25.5
Compression: 10.5:1
Kit includes: 6 Cylinders, 6 Pistons, A set of Piston Rings, and 6 wrist pins and clips.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
00891192SJE
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
JE Forgings are made from 2618 Aluminum, They have a 0 offset with extra material under the top for the valve pockets. The Cast Iron Liners come with out the head gasket grove.
Engine size: 2.7
Stroke: 70.4
Cylinders: Cast Iron
Pistons: JE 2618 Forged
Dome CC: 19.7
Compression: 9.5:1
Kit includes: 6 Cylinders, 6 Pistons, A set of Piston Rings, and 6 wrist pins and clips.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
00891192EJE
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
It fits Porsche 356; C, SC, 1963-66 & Porsche 912; 1965 and Up with the 3 piece Case. The Cylinders are Biral with Graphite Coated Hypereutectic pistons with the 30° Angle, valve pockets, and the 22mm Pin. Biral Liners are a cast iron sleeve with aluminum fins, making them lighter and dissipate heat better. This kit requires no machine work, when installing in factory Porsche case & heads.
Engine size: 1600cc
Stroke: 74mm
Cylinders: Biral.
Pistons: Hypereutectic
Dome CC: 17
Compression: 9.2:1
Piston Angle: 30°
Kit includes: 4 Cylinders, 4 Pistons, A set of Piston Rings, and 4 wrist pins and clips.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
0081186PB
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356C 1963-65
It fits Porsche 356; C, SC, 1963-66 & Porsche 912; 1965 and Up with the 3 piece Case. The Cylinders are cast iron with Graphite Coated Hypereutectic pistons with the 30° Angle, valve pockets, and the 22mm Pin. This kit requires no machine work, when installing in factory Porsche case & heads.
Engine size: 1600cc
Stroke: 74mm
Cylinders: Cast Iron.
Pistons: Hypereutectic
Dome CC: 17
Compression: 9.2:1
Piston Angle: 30°
Kit includes: 4 Cylinders, 4 Pistons, A set of Piston Rings, and 4 wrist pins and clips.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
0081186PS
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356C 1963-65
It fits Porsche 356; C, SC, 1963-66 & Porsche 912; 1965 and Up with the 3 piece case. The Cylinders are Biral with JE Forged pistons with 30° Angle.
JE Forgings are made from 2618 Aluminium, They have a 0 offset with extra material under the top for the valve pocket, Biral Liners are a cast iron sleeve with aluminium fins, making them lighter and dissipate heat better . This kit requires no machine work, when installing in factory Porsche case & heads.
Engine size: 1600cc
Stroke: 74mm
Cylinders: Biral.
Pistons: JE 2618 Forged
Dome Height: .155
Compression: 9.5:1
Piston Angle: 30°
Kit includes: 4 Cylinders, 4 Pistons, A set of Piston Rings, and 4 wrist pins and clips.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
0081186PJE
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356C 1963-65
CP Forgings are made from 2618 Aluminium, They have a 0 offset with extra material under the top for the valve pockets, CP kits come with wirelock pin clips for extreme RPM. Biral Liners are a cast iron sleeve with aluminium fins, making them lighter and dissipate heat better. This kit requires no machine work, when installing in factory Porsche case & heads
Engine size: 2.2/2.4L
Stroke: 66/70.4mm
Cylinders: Biral.
Pistons: CP 2618 Forged
Dome Height: .450
Compression: 9.5:1/10.7:1
Kit includes: 6 Cylinders, 6 Pistons, A set of Piston Rings, and 6 wrist pins and wirelocks with tool.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
00891186SCP
The product you are viewing cross references to these numbers
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
The Compression ratio is 9.5:1 with the 66mm crank. JE Forgings are made from 2618 Aluminium, They have a 0 offset with extra material under the top for the valve pockets. Biral Liners are a cast iron sleeve with aluminium fins, making them lighter and dissipate heat better. This kit requires no machine work, when installing in factory Porsche case & heads
Engine size: 2.0
Stroke: 66
Cylinders: Biral.
Pistons: JE 2618 Forged
Dome Height: .460
Compression: 9.5:1
Kit includes: 6 Cylinders, 6 Pistons, A set of Piston Rings, and 6 wrist pins and clips.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
00891181SJE
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
The Compression ratios are 10.5:1 with the 66mm crank and 11.2:1 with the 70.4mm. JE Forgings are made from 2618 Aluminium, They have a 0 offset with extra material under the top for the valve pockets. Biral Liners are a cast iron sleeve with aluminium fins, making them lighter and dissipate heat better. This kit requires no machine work, when installing in factory Porsche case & heads
Engine size: 2.2/2.4L
Stroke: 66/70.4mm
Cylinders: Biral.
Pistons: JE 2618 Forged
Dome Height: .450
Compression: 10.5:1/11.2:1
Kit includes: 6 Cylinders, 6 Pistons, A set of Piston Rings, and 6 wrist pins and clips.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
00891186SJE
The product you are viewing cross references to these numbers
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
The Compression ratios are 9.2:1 with the 66mm crank and 9.5:1 with the 70.4mm. JE Forgings are made from 2618 Aluminium, They have a 0 offset with extra material under the top for the valve pockets. Biral Liners are a cast iron sleeve with aluminium fins, making them lighter and dissipate heat better. This kit requires no machine work, when installing in factory Porsche case & heads
Engine size: 2.2/2.4L
Stroke: 66/70.4mm
Cylinders: Biral.
Pistons: JE 2618 Forged
Dome Height: .300
Compression: 9.2:1/9.5:1
Kit includes: 6 Cylinders, 6 Pistons, A set of Piston Rings, and 6 wrist pins and clips.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
00891186EJE
The product you are viewing cross references to these numbers
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
JE Forgings are made from 2618 Aluminum, They have a 0 offset with extra material under the top for the valve pockets. The Cast Iron Liners come with out the head gasket grove.
Engine size: 2.7
Stroke: 70.4
Cylinders: Cast Iron
Pistons: JE 2618 Forged
Dome CC: 27.3
Compression: 10.5:1
Kit includes: 6 Cylinders, 6 Pistons, A set of Piston Rings, and 6 wrist pins and clips.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
00891190SJE
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
JE Forgings are made from 2618 Aluminum, They have a 0 offset with extra material under the top for the valve pockets. The Cast Iron Liners come with out the head gasket grove.
Engine size: 2.7
Stroke: 70.4
Cylinders: Cast Iron
Pistons: JE 2618 Forged
Dome CC: 21.8
Compression: 9.5:1
Kit includes: 6 Cylinders, 6 Pistons, A set of Piston Rings, and 6 wrist pins and clips.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
00891190EJE
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
Fits:
Porsche 356
Porsche 912
Cylinders: Cast Iron.
Kit included: 4 Cylinders
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
0081186SL
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356 1950-55
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Fits:
Porsche 356
Porsche 912
Cylinders: Biral
Kit included: 4 Cylinders
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
0081183BL
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356 1950-55
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Fits:
Porsche 356
Porsche 912
Cylinders: Biral.
Kit included: 4 Cylinders
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
0081186BL
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356 1950-55
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Fits:
Porsche 356
Porsche 912
Cylinders: Biral
Kit included: 4 Cylinders
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
0081182BL
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356 1950-55
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Fits:
Porsche 911 2.0L
Cylinders: Biral.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
0089118
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
Fits:
Porsche 911 2.2L / 2.4L
Cylinders: Biral
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
0089118
The product you are viewing cross references to these numbers
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Fits:
Porsche 911 2.7L
Cylinders: Cast Iron
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
0089119
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
The Cylinders are Biral with Graphite Coated Hypereutectic pistons with valve pockets, and the 22mm Pin. Biral Liners are a cast iron sleeve with aluminum fins, making them lighter and dissipate heat better. This kit requires no machine work, when installing in factory Porsche case & heads.
Engine size: 2.2/2.4L
Stroke: 66/70.4mm
Cylinders: Biral.
Pistons: Hypereutectic
Dome Height:
Compression: 9.1:1/9.7:1
Kit includes: 6 Cylinders, 6 Pistons, A set of Piston Rings, and 6 wrist pins and clips.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
00891184S
The product you are viewing cross references to these numbers
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
The Cylinders are Biral with Graphite Coated Hypereutectic pistons with valve pockets, and the 22mm Pin. Biral Liners are a cast iron sleeve with aluminum fins, making them lighter and dissipate heat better. This kit requires no machine work, when installing in factory Porsche case & heads.
Engine size: 2.2/2.4L
Stroke: 66/70.4mm
Cylinders: Biral.
Pistons: Hypereutectic
Dome Height:
Compression: 8.5:1/9.1:1
Kit includes 6 Cylinders, 6 Pistons, A set of Piston Rings, and 6 wrist pins and clips.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
00891184E
The product you are viewing cross references to these numbers
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
The Cylinders are Biral with Graphite Coated Hypereutectic pistons with valve pockets, and the 22mm Pin. Biral Liners are a cast iron sleeve with aluminum fins, making them lighter and dissipate heat better. This kit requires no machine work, when installing in factory Porsche case & heads.
Engine size: 2.2/2.4L
Stroke: 66/70.4mm
Cylinders: Biral.
Pistons: Hypereutectic
Dome Height:
Compression: 9.5:1/10.7:1
Kit includes: 6 Cylinders, 6 Pistons, A set of Piston Rings, and 6 wrist pins and clips.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
00891186S
The product you are viewing cross references to these numbers
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Fits: Porsche 356C / SC 1963-66 & Porsche 912 1965 and Up with the 3 piece Case.
Graphite Coated Hypereutectic pistons with the 30° Angle, valve pockets, and the 22mm Pin.
Engine size: 1600cc
Stroke: 74mm
Pistons: Hypereutectic
Dome CC: 17
Compression: 9.2:1
Piston Angle: 30°
Kit includes: 4 Pistons, A set of Piston Rings, and 4 wrist pins and clips.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
0081186SP
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356C 1963-65
Fits: Porsche 356 C / SC 1963-66 & Porsche 912 1965 and Up with the 3 piece case.
JE Forgings are made from 2618 Aluminum, They have a 0 offset with extra material under the top for the valve pocket and the 30° Angle. This is a High Compression Piston kit 11.5:1 more commonly used in race-cars .
Engine size: 1600cc
Stroke: 74mm
Pistons: JE 2618 Forged
Dome Height: .295
Compression: 11.5:1
Piston Angle: 30°
Kit includes: 4 Pistons, A set Piston Rings, and 4 wrist pins and clips.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
008118
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356C 1963-65
Fits: Porsche 911S 2.2L / 2.4L
Engine size: 2.2/2.4L
Stroke: 66/70.4mm
Pistons: Hypereutectic
Kit includes: 6 Pistons, A set of Piston Rings, and 6 wrist pins and clips.
OPTIONS:
1. 84mm - Low compression
The Compression ratios are 8.5:1 with the 66mm crank and 9.1:1 with the 70.4mm.
2. 84mm - High compression
The Compression ratios are 9.1:1 with the 66mm crank and 9.7:1 with the 70.4mm.
3. 86mm - High compression
The Compression ratios are 9.5:1 with the 66mm crank and 10.7:1 with the 70.4mm.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
0089118
The product you are viewing cross references to these numbers
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Fits: Porsche 356C, SC, 1963-66 & Porsche 912; 1965 and Up with the 3 piece case.
JE Forged pistons with 30° Angle. JE Forgings are made from 2618 Aluminum, They have a 0 offset with extra material under the top for the valve pocket
Engine size: 1600cc
Stroke: 74mm
Pistons: JE 2618 Forged
Dome Height: .155
Compression: 9.5:1
Piston Angle: 30°
Kit includes: 4 Pistons, A set of Piston Rings, and 4 wrist pins and clips.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
0081186JEP
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356C 1963-65
JE Forgings are made from 2618 Aluminum, They have a 0 offset with extra material under the top for the valve pockets.
Fits: Porsche 911S 2.2L / 2.4L
Engine size: 2.2/2.4L
Stroke: 66/70.4mm
Pistons: JE 2618 Forged
Kit includes: 6 Pistons, A set of Piston Rings, and 6 wrist pins and clips.
OPTIONS:
1. 84mm - High compression
The Compression ratios are 10.1:1 with the 66mm crank and 10.6:1 with the 70.4mm.
2. 86mm - Low compression
The Compression ratios are 9.2:1 with the 66mm crank and 9.5:1 with the 70.4mm.
3. 86mm - High compression
The Compression ratios are 10.5:1 with the 66mm crank and 11.2:1 with the 70.4mm.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
0089118
The product you are viewing cross references to these numbers
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Engine Modifications & Upgrades
- Electronic Fuel Injection Throttle Kits
- IRIDIUM POWER Spark Plugs
- IRIDIUM RACING Spark Plugs
- Hi Flow Air Filters
- Air Induction Kits
- Short GearShift Kits
- Inter Coolers
- Turbo Chargers
- Performance Plenum
- ECU Reader / Fault Finder
- Exhaust Packages
- Fuel Additives
- Pedals / Floor Boards / Track Mats LHD Cars
- Pedals / Floor Boards / Track Mats RHD Cars
- Fire Extinguisher Mounts
- Brey-Krause Fire Extinguisher Mount
- Tow Eye Hooks & Tie Downs
- Alloy Block Off Plates
- Clutches / Flywheels / Hydraulics
- Track & Race Coolant Radiators
- Wössner Forged Piston Kit
- Wössner Steel Connecting Rods
- CP Carrillo Pistons
- CP Carrillo Connecting Rods
- Brake Hoses Stainless Steel Goodridge