Roll Cages
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
Not for Competition Use
Fits
Porsche 986 Boxster - 1997 to 1999
6 point bolt-in roll cage for unique single door bars.
Rear roll cage has single fixed diagonal and harness bar.
Build the roll cage to your individual specification using the rear cage and door bar options available below.
• Front roll cage for unique single door bars
(Must be used with the rear roll cage)
• Rear cage, single fixed diagonal, harness bar, without convertible roof brackets.
(May be used without the front cage)
• Rear cage, single fixed diagonal, harness bar, with convertible roof brackets.
(May be used without the front cage)
• Single door bar N/S (left)
(Must be used with the front and rear cage)
• Single door bar O/S (right)
(Must be used with the front and rear cage)
• Finished roll cage supplied with black powder coat finish
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster S 986 3.2L 1999-02
For Porsche 986 Boxster only ('97-'04)
Material: 1/4" water-jet machined 6061-T6 aluminum plate and mounting brackets with 3/4" high density foam padding.
Finish: Powder-coated in durable black wrinkle-finish.
Weight: 3 lbs.
Models: Boxster
Installation: Attaches to R-3010 Boxster roll bar extension
Miscellaneous: One kit includes both pads for driver and passenger sides
For Installation instructions please CLICK HERE
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
For Porsche 986 Boxster only ('97-'04)
Porsche enthusiasts asked us to find a way to extend the head protection of the factory roll bar for track use.The "roll bar extension" increases the available headroom in the Boxster by an additional 1 3/4" above the factory bar.
The "roll bar extension" provides sufficient head room to permit the use of driving helmets. Protective tape keeps factory surfaces from becoming marred while careful engineering and design result in a secure fit that will not damage the car in anyway.
Material: 120 wall, type 304, stainless steel tubing and mounting brackets.
Finish: Powder-coated in durable black wrinkle-finish.
Weight: 10 lbs. 5 oz
Models: 986 Boxster only ('97-'04)
Installation: Bar attaches to factory roll bar & seat belt mounting points.
Miscellaneous: Bar is easy to remove and will not interfere with the soft or hard top. Bar can be stowed in trunk. Does not fit the 987.
For Installation instructions please CLICK HERE
Accessories:
Replacement Hardware: R-3010-HW
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
For Porsche 987 Boxster ('05-'12)
Building on the success of our R-3010 Roll Bar Extension Kit for later model 986 Porsche Boxsters, Brey-Krause introduces its Roll Bar Extension Kit for the 987 Boxster.
The roll bar extension increases the available headroom in the Boxster by an additional 1 3/8" above the factory roll hoop. This unit provides sufficient head room to permit the use of driving helmets. Protective tape keeps factory surfaces from becoming marred while careful engineering and design result in a secure fit that will not damage the car in anyway.
Material: 120 wall, type 304, stainless steel tubing and mounting brackets.
Finish: Powder-coated in durable flat silver finish.
Weight: 10 lbs. 5 oz
Models: 987 Boxster ('05-'12)
Installation: Bar attaches to factory roll bar & seat belt mounting points.
Miscellaneous: Bar is easy to remove and will not interfere with the soft or hard top. Bar can be stowed in trunk.
For Installation instructions please CLICK HERE
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Restoration Chassis / Repair Panels
- Front Lid Damper
- Rear Lid Damper
- Bonnets / Locks & Latches
- Boots / Rear Lid / Locks and Latches
- Rear lid / Tailgate
- Bumpers Front
- Bumpers Rear
- Door Handles | Locks | Keys
- Door Panels | Hinges | Striker Plates
- Window Lifters | Motors
- Wings Front & Parts
- Wings Rear & Parts
- Side Sill Panels
- Exterior Chassis Mouldings
- Mirrors & Parts
- Stone Chip Foils / Stickers
- Undertrays Chassis & Engine
- Wiper Blades / Arms
- Wheel Arch Linners & Covers
- Roof - Cabrio / Targa / Coupe / Speedster
- Plastic Covers
- Sound Proofing
- Engine Covers
- Front screen
- Rear screen
- Floor & Sections